Blindsight's relay can be used to trigger any device that is plugged into its output. This includes sirens, lights, and electronic trigger signals to 3rd party systems.
Note that the relay uses 2 pin Deutsch connectors, the output voltage is equal to the supplied input voltage, and maximum current 10A.
Steps to configure;
Open the Blindsight app and navigate to the BPU you would like to pair your relay with
Tap "Alert Devices"
Tap "Pair New Devices"
Ensure relay is ready to pair by observing a flashing blue status light. If the light is not flashing blue, press and hold the pairing button for 10 seconds until a beep is heard
Upon successful pairing, the relay output can be configured for your desired state
โ
No Light | No power to device | |
Solid Green | Running normally | |
Solid Red | System fault. Check that your relayed is correctly paired | |
Blue flash (fast) | Relay ready to be paired. Learn how to pair here |