Blindsight's relay can be used to trigger any device that is plugged into its output. This includes sirens, lights, and electronic trigger signals to 3rd party systems.

Note that the relay uses 2 pin Deutsch connectors, the output voltage is equal to the supplied input voltage, and maximum current 10A.

Steps to configure;

  1. Open the Blindsight app and navigate to the BPU you would like to pair your relay to

  2. Tap "Alert Devices"

  3. Tap "Pair New Devices"

  4. Ensure relay is ready to pair by observing a flashing blue status light. If the light is not flashing blue, press and hold the pairing button for 10 seconds until a beep is heard

  5. Upon successful pairing, the relay output can be configured for your desired state

No Light

No power to device

Solid Green

Running normally

Solid Red

System fault. Check BPU status

Blue flash (fast)

Relay ready to be paired

Did this answer your question?